Structural review
The framing is checked for the weight of tile so the roof does not sag over time.
Tile Roofing
Tile Roof Installation Bergenfield, NJ
A Bergenfield tile roofer can help choose between clay and concrete, flat or curved profiles, and install the full system beneath the tile. Dial (551) 374-2021 to talk with a local roofer about a new tile roof.
Tile is one of the heaviest roofing materials a house can carry, so a tile roof installation starts below the roof. Because tile is so heavy, homes converting from shingles usually need the framing checked, and some need reinforcement first. Houses designed for tile already account for that load in their framing.
Next comes the material. Fired clay is the long lasting classic, while concrete tile is a sturdy, widely available option whose surface color softens with age. Profiles run from flat tiles that look like slate or shakes to S-shaped tile and two-piece barrel tile.
The tile may last generations, but the layers below it decide when the roof leaks. Slope matters too: tile generally needs at least 2.5 in 12, and slopes under 4 in 12 need a double layer of underlayment. Investing in the underlayment up front is what lets the tile live out its full life.
If the problem goes deeper than it first looked, a Bergenfield roofer may also recommend tile roof replacement or roof installation.
Need tile roof installation in Bergenfield? Call (551) 374-2021 and describe the problem to a roofer who works in Bergenfield.
Call nowThe process
The tile roof installation process
A tile roof goes on in layers, and the tile is the last of them.
Confirm the framing
The job starts with the structure: span tables or an engineer confirm the framing, and the building permit is secured. It is smart to keep a stack of spare tile from the same batch for future repairs.
Lay the underlayment
Decking is checked and fastened, drip edge goes on, and the deck is covered with the chosen underlayment, with self-adhered membrane in valleys and at eaves where ice or wind-driven rain is a concern. The underlayment is the true waterproof layer, so this step deserves the most care.
Set the battens
Battens are fastened across the roof at spacing set by the tile, and on many roofs counter battens run beneath them so water can drain freely. Some systems skip battens and fasten tile directly, depending on the profile and the slope.
Install flashing
Flashing goes in at valleys, sidewalls, headwalls, skylights and pipes, sized for the deep profile of tile. Because tile is thick and curved, flashing must be wider and shaped to fit.
Set the field tile
Starting at the eave with a bird stop or eave closure, the roofer lays each course up the roof, fastening tile with nails, screws, clips or tile adhesive as the wind rules require. Cut tiles at hips and valleys are fastened too, since small pieces are the first to blow off.
Cap the ridge
The ridge is finished with caps over a ridge board, set in mortar or fastened dry with a breathable closure. Any tile cracked during the job is replaced before cleanup.
What is included
A complete tile roof system
Tile flashing
Every penetration and wall joint is flashed which is where tile roofs usually leak.
Eave closures
Bird stops close the eave and caps seal the ridge with ventilation where the design calls for it.
Waterproof layer
The deck is covered with underlayment suited to the slope before any tile goes on the roof.
Tile fastening
Battens or direct fastening hold every course so tiles stay put in strong wind.
Related service
Barrel Tile Roof Installation Bergenfield, NJ
Barrel tile is the classic two-piece tile roof: half-round pan tiles laid concave side up, with cover tiles laid over the joints between them. Each tapered tile overlaps the one below it, and the deep shape throws the strong shadow lines that give the roof its look. The open curves at the eaves and ridges must be closed so birds, wind and rain cannot get in.
Barrel tile roof installation in Bergenfield calls for extra attention to fastening, since cover tiles sit high and catch wind. A crew snaps lines so pans and covers stay straight from eave to ridge.
Related service
Spanish Tile Roof Installation Bergenfield, NJ
Most Spanish tile today is one-piece S tile, which mimics the classic two-piece look while going on faster. Clay and concrete Spanish tile are both common, in solid and blended colors. Side interlocks help it shed water, though the curved ends need bird stops and ridge closures just like barrel tile.
For Spanish tile roof installation in Bergenfield, the underlayment and flashing matter as much as the look of the tile. The curves make flashing tricky, so roofers use shaped metal or flexible flashing that conforms to the tile. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.
Local help
Tile Roof Installation Near Me
In Bergenfield, new tile roofs go onto homes of every age, from fresh builds to older houses moving away from shingles. Homes in Bergenfield and surrounding areas such as New Milford, Dumont, River Edge and Cresskill that were framed for shingles often need a structural review before tile is an option, and storms that bring strong wind make fastening choices as important as the tile itself.
For tile roof installation in Bergenfield, NJ or nearby towns like New Milford, Dumont, River Edge and Cresskill, call (551) 374-2021 to reach a roofer who covers your street.
How the weather here affects roofs around Bergenfield
Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Bergenfield is busiest after a hard winter and before the next one.
Why call
Why fix it now
Smaller repairs
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Local knowledge
Local roofers see the same roofs and storm damage across Bergenfield and nearby towns.
Straight answers
Ask the roofer about the cause, the options and the estimate before work starts.
Tile Roof Installation questions
How long does it take to put on a tile roof?
Tile goes on slower than shingles, so most homes take one to several weeks. Complex rooflines and framing work before tiling can stretch the schedule. Once the underlayment is down, the house is protected from rain while tile goes on.
Can my house hold a tile roof?
A tile roof is far heavier than a shingle roof, and concrete tile tends to weigh more than clay. Whether a given house can carry it depends on the framing, which is why conversions from shingles start with a structural review. Lightweight concrete tile is an option for some homes that fall short of the load for standard tile.
What underlayment goes under a tile roof?
The common choices are felt, synthetic underlayment and self-adhered membrane. The underlayment usually wears out long before the tile, so a durable one delays the first relay. Codes call for two layers on slopes from 2.5 in 12 up to 4 in 12.
What is better, clay or concrete tile?
The choice comes down to priorities. Clay tile resists fading and has lasted a century or more on some older buildings. Concrete offers a huge range of styles, but it is heavier than clay and fades as it ages.
Can tile be installed over an existing roof?
Tile goes onto a clean deck, so the old roof comes off first. Removing the old roof also takes weight off the framing, which matters with a material this heavy.
More questions? Call (551) 374-2021
Other services that may help
Tile Roof Replacement
Full tile roof replacement when the underlayment, fasteners or tile have reached the end of their life, so the layers under the tile last as long as the tile.
Learn moreRoof Installation
Installing a new roof layer by layer, from drip edge and underlayment to flashing, vents and the finished roofing, whether it is asphalt shingles, metal or another material.
Learn moreTile Roof Inspection
A close look at the tile, underlayment, flashing, valleys and attic of a clay or concrete tile roof, with a written report of what needs attention now and what can wait.
Learn moreRoof Ventilation
Roof ventilation work that keeps the attic dry in winter and cooler in summer, so shingles and decking last as long as they should.
Learn more
Looking for something else?
See all roofing servicesGet tile roof installation help in Bergenfield
Call now for Bergenfield tile roof installation and help in the towns around it.